1. Operation method of manual pallet stacker
Check the working conditions of the brake and pump station before driving the manual stacker and ensure that the battery is fully charged. Hold the control handle with both hands and force the vehicle to move slowly towards the working goods. If you want to stop, use the hand brake or foot brake to stop the vehicle.
2. Unloading operation method of manual pallet stacker
(1) When the fork is low, keep it perpendicular to the shelf and carefully approach the shelf and insert it into the bottom of the pallet.
(2) Return the stacker to let the fork move out of the pallet.
(3) Raise the fork to the required height and move it slowly to the pallet to be unloaded, while ensuring that the fork can easily enter the pallet and the goods are in the safe position of the fork.
(4) Lift the fork until the pallet is lifted from the shelf.
(5) Step back slowly in the passage.
(6) Lower the goods slowly and ensure that the fork does not touch obstacles during lowering. Note: During the lifting of the goods, the steering and braking operations must be slow and careful.
3. Stacking operation method of manual stacker
(1) Keep the goods low and approach the shelves carefully.
(2) Lift the goods above the shelf plane.
(3) Move forward slowly, stop when the goods are above the shelf, put down the pallet at this point and pay attention to the fork not exerting force on the shelf under the goods to ensure that the goods are in a safe position.
(4) Return slowly and ensure the pallet is in a firm position.
(5) Lower the fork to the position where the stacker can drive.
Post time: Mar-16-2023