1) Remove the battery fastening screws.
2) Remove the cable from the battery terminal.
3) Slide out or lift out the battery.
4) Install the battery according to the reverse process indicated above, tighten and connect correctly. (Replacement battery must be the same model)
Precautions
1) Charging should be in a well-ventilated place, open the top cover or take the battery out of the car.
2) Never expose the battery to an open flame. The resulting explosive gas may cause a fire.
3) Never do temporary wiring or wrong wiring.
4) The wiring end must be tensioned without peeling, and the cable insulation must be reliable.
5) Batteries should be kept clean and dry, and anti-static cloth should be used to remove dust.
6) Do not place tools or other metal objects on the battery.
7) The temperature of the electrolyte during charging shall not exceed 45℃.
8) Check the electrolyte level after finishing to charge, which should be 15mm higher than the partition. Normally, the steam tank water should be filled once a week.
9) Avoid skin contact with acid, once contact with a lot of soapy water or consult a doctor.
10) Waste batteries should be disposed of according to the relevant local regulations.
Post time: Nov-29-2022