• liansu
  • tuite (2)
  • tumblr
  • youtube
  • lingfy

Advantages of electric straddle pallet stacker

1.The electric straddle pallet stacker can increase the stability of the body, in technical terms is to increase the wheelbase of the front and rear wheels, so that the vehicle is more safe and stable when moving forward and backward.
2.The straddle pallet stacker can effectively reduce the weight of the body. Because of the use of legless design, then must use the lever principle, if you need to achieve the load capacity of 1.5 tons, then the weight of the vehicle is at least 1.5T to lift the corresponding goods.But thestraddle design makes up for the shortcomings brought by the lever principle, cleverly stretching the fulcrum forward through the form of the support leg for a greater distance, so that its load weight and the weight of the body itself can easily exceed 1:1 ratio. For example, if the cargo weighs 1.5 tons, it does not need to be heavy to 1.5 tons. Perhaps the body weight of the body is half of that, that is 750kg. Even more than 300 kilograms can lift 1.5 tons of cargo. It can be seen that the design of the straddle pallet stacker makes the traditional lever principle a very good improvement.
3.It can effectively shorten the size of the stacker, so that the stacker is small and compact. Because of the support legs, fulcrum forward, no need to increase additional counterweight, so the length of the body can be effectively reduced.
Electric straddle stacker applicable requirements.
1. There are many restrictions on the scope of use, it is not suitable for the environment with high slope. For one strand, the slope cannot exceed 7°, otherwise the chassis may run aground. Not applicable to shelves and stacking places where the fork is not accessible at the bottom.
2.There has requirements for pallets. Pallets can be roughly divided into single-sided type and double-sided type, straddle pallet stacker can only be used with single-sided pallet.
3. There are certain requirements for the height of the pallet. Generally speaking, the height of the fork is 85mm or 90mm, then pallet gap height used must exceed the fork height.
According to the different customers needs,our factory also produce more kinds of stacker ,such as wide leg stacker, no fixed leg counterbalance stacker,manual stacker,walkie stacker ,semi electric stacker,etc. There has more other choices for customers.

pallet stacker

Post time: Dec-07-2022